Follow these Maintenance Tips to Help Your Medium and Heavy Duty Truck Run Well
There are numerous aspects to consider when it comes to truck fuel efficiency. Some variables outside the control of fleet management, such as weather, traffic, or mandated routes, but others, such as powertrain specs, vehicle aerodynamics, and driver training, can be. Maintaining your vehicle properly might also help you save money on truck lubricants.
According to industry research, good maintenance of your truck and engine can dramatically enhance fuel economy. According to Mitchell 1, routine maintenance can enhance fuel mileage by as much as 5%. Properly maintained fuel, air intake, and lubrication systems, as well as properly inflated tyres, aligned wheels, and adjusted brakes, are all necessary for good fuel economy.
Trucks come in a variety of shapes, colours, and sizes. Truck maintenance is a widespread procedure, regardless of size or design. Truck maintenance should be performed at regular intervals to ensure the efficiency of your operations as well as road safety. Maintenance is essential not just for the safety of your driver and your truck, but also for the safety of other road users. Choosing the right heavy duty truck oils is one of the smart ways to maintain your trucks.
Have a look at these maintenance tips for keeping your medium and heavy duty truck running smoothly:
Change the engine oil and filter
Damage to the truck's engine can be avoided with regular and thorough maintenance, which can be costly to fix. It also guarantees that the truck is working as efficiently as possible. Truck lubricants that are clean and of good quality protect the engine and keep its components oiled.
When dust or debris gets into the oil, it has a major impact on the performance. A smooth-running engine is ensured by changing the truck lubricants and the oil filter. To determine how often the oil should be changed, consult the manufacturer's instructions. This may differ depending on the distance or type of driving your trucks do.
Check the levels of other fluids
Almost every fluid has a mileage or time interval for when it has to be replaced. Whether a fluid level is low, make it a practise to inspect all of the lines and components through which that fluid runs to see if there is a leak. One thing to keep in mind is that all fluids should be checked with the car on level ground. The following are some of the most common fluids to inspect:
- Transmission fluid: The transmission fluid's job is to cool, protect, and allow the transmission to perform smoothly. Its fluid should be checked on a regular basis, just as the engine oil.
- Coolant: Check its level at every oil change and before any journeys where the car will be driven hard or over long miles, as unclean or misused old coolant will prevent corrosion inhibitors from working effectively.
Examine the braking system
Although brake and power-steering fluids can last a long period, the manufacturer may recommend changing them at regular intervals. Both fluids can be harmed by moisture and heat; if one comes into touch with water or is warmed for a lengthy period of time, they should be changed promptly. It is dangerous to leave the brakes unchecked. When you're on the road, you have to be very careful about the wear and tear of even the tiniest of engine parts. The safety of the drivers and the laden cargo will be ensured by a well-functioning braking system. While changing the oil, make sure to check your truck's brakes as well.
Inspect the tyres
The tyre pressure on the truck should be checked frequently to ensure compliance with the manufacturer's specifications. Checking the wear of the tyres is an important element of tyre maintenance. Tires should be rotated on a regular basis to ensure even wear. It's worth noting that trucks often carry higher loads than vehicles, which raises the safety issues connected with low air pressure. Tyres will wear out significantly faster if they are not maintained on a regular basis.
Trucks are large, expensive machinery that can be costly to repair if they are not managed properly. To handle your durable commercial assets and ensure a smooth and extended vehicle life, always rely on well-trained mechanics and make sure to use the best quality oils and diesel trucks lubes. Choose the right heavy duty truck oils that offer first-rate wear control and soot dispersancy while providing outstanding protection against corrosion and wear.